10” Silicone Loaf Soap Mold

A flexible yet sturdy soap making loaf mold. The inside of the mold features a high gloss smooth finish to give your soap a smooth, professional finish. With reinforced sides, this silicone soap loaf mold helps to prevent bowing so that the finished soap edges are smooth and straight. 

Makes roughly 2.5-3 lb of soap by weight depending on the method and base used. 

Tip: If making cold process soap in this silicone mold we recommend also adding sodium lactate to the soap recipe. This will help harden the soap so that there are less dents or finger impressions when unmolding the soap.

Overall Dimensions: 9.5” x 5”
Inside dimensions: 8” x 3.5”
2.5” depth
Finished bars are 3.5” x 2.5” x 1”
Temperature range: up to 400 degrees F

For best results, hand wash to clean with warm, soapy water and air dry. Wipe down with distilled water to remove any water spots.

Its recommended to allow your soap to cool for at least 24 hours before trying to remove from the mold. If you still have problems removing from the mold, place in the freezer for 20-40 minutes and then try again.