A durable and high-quality silicone soap mold that produces a large loaf shaped soap that can be sliced into individual pieces. Our flexible silicone loaf mold fits perfectly inside our wooden box frame for durable, sturdy soap making setup.
Makes roughly 2.5-3 lb of soap by weight depending on the method and base used. If cutting 1” wide bars, you’ll receive roughly 10 finished rectangular soap bars.
Tip: If making cold process soap in this silicone mold we recommend also adding sodium lactate to the soap recipe. This will help harden the soap so that there are less dents or finger impressions when unmolding the soap.
Wood Box Dimensions: 11 1/4” x 3 5/8”
Silicone Liner: 3.5” x 11”, Inner Dimensions: 10 1/4” x 2 3/4” x 3” deep
Finished Bars: 3” x 2 3/4” x 1”
Temperature range: up to 400 degrees F
For best results, hand wash to clean with warm, soapy water and air dry. Wipe down with distilled water to remove any water spots.
Its recommended to allow your soap to cool for at least 24 hours before trying to remove from the mold. If you still have problems removing from the mold, place in the freezer for 20-40 minutes and then try again.
